 |
80 PERCENT ARMS GEN 3 EASY JIG TOOL KIT WITH SPEEDMILL AND DRILL BITS
MPN: 40000-1A
SIZE: A/1
The Gen 3 tool kit with SpeedMill™ is our strongest, fastest, and longest lasting tool kit yet. Our all new solid carbide SpeedMills™ tooling is capable of putting out 5-7 lowers before needing replacement, with more methodical end-users being able to push past 10-lowers on average. Not only is the SpeedMill™ tougher, but the end mills are easily replaceable as well. Coupled with our new heat-shrink tool holder, this combination virtually eliminates deflection and total runout. All components are precision manufactured in the USA.
Kit Includes:
- Speedmill™ with Solid Carbide End Mill - SIZE "A/1"
- 3/8 Drill Bit
- 21/64 Drill Bit
- 5/32 Drill Bit
This 80% lower drill bit kit is designed for the Easy Jig® Gen 3. This kit is NOT compatible with our drill press jig or, Easy Jig® Gen 1 Easy Jig® Gen 2.
The Speedmill is a direct-thread unit that makes sure you have the most solid lock-up and repeatability when it comes to milling your lower to CNC level results. Because of this feature, each router will require a different size selected when you order.
Sizing Guide:
Please see the picture attached to select your correct Speedmill. Please be advised if your router needs the D/4 Speedmill, you will also need to purchase the Large Router Base.
Here is a quick reference guide if you would like to measure your router.
_________________________________________________
Tool Size Thread Pitch Spindle Diameter
A/1 M14 X 1 0.55" / 13.9MM
B/2 M15 X 1 0.59" / 15MM
C/3 M17 X 1 0.66" / 16.8MM
D/4 M20 X 1 0.78" / 19.9MM
_________________________________________________
|
|
|
Great tool set 
